Mill-max mfg. corp.

Features of most Mill-Max Spring-Loaded Contact Pins: Built to last up to 1,000,000 Cycles. Typical Contact Resistance, 20mΩ at mid stroke. Tested to a minimum of 50G shock and 10G vibration. Gold Plated Components provide optimal electrical & mechanical performance. Rated Current between 2 and 9 amps continuous @ 30° temperature rise.Pin Receptacles - The Backbone of your Interconnect System. The basic component used for making electrical connections in a wide array of electronic equipment is the pin receptacle. Sometimes referred to as PCB sockets, micro-plugs or connector jacks, machined pin receptacles are known for their reliability and versatility.For board-to-board or device-to-board connections, these 2mm spring-loaded connectors are a practical solution. The connectors feature spring pins with a rated travel of .0275” (0,7mm) and a maximum travel of .055” (1,4mm). With a base diameter on the pins of .056” (1,42mm) and a plunger diameter of .032” (,81mm) there is adequate space ... The insulator for the socket and both adapters is machined FR-4 glass epoxy laminate that has a TCE to match the BGA device and circuit board: .047" thick epoxy for 1mm grid systems, .062" thick for .050" grid. Mill-Max also offers the option of having the mounting surfaces of the socket or PCB adapter pre-tinned to replicate solder balls.

Features of most Mill-Max Spring-Loaded Contact Pins: Built to last up to 1,000,000 Cycles. Typical Contact Resistance, 20mΩ at mid stroke. Tested to a minimum of 50G shock and 10G vibration. Gold Plated Components provide optimal electrical & mechanical performance. Rated Current between 2 and 9 amps continuous @ 30° temperature rise.Brass Alloy. 15: Packaged in Bulk. Active. Order. PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 0305-.All sockets accept .008" - .043" (0,20 -1,09) diameter leads and are made using our unique 4-finger Berylium Copper contact clip, which provides a high reliability gas-tight seal. Mill-Max connectors are available in the following configurations: Pluggable using a mating socket and header. Permanent by soldering a through …

00: Packaged in Bulk. Active. Order Sample. PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 3128-. 2.

00: Packaged in Bulk. Active. Order Sample. PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 3121-. 2.67: On Tape & Reel with Organic Fibre Plug. 5500. Active. Order. PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 4015-.MILL-MAX Mfg. Corp, is committed to supplying products that meet environmental control requirements for our Customers. Mill-Max uses high speed, precision screw machines to manufacture pins, receptacles, and Spring-Loaded Connectors. If you are in need of a low cost alternative to a stamped product, a precision-machined product would not be the best suggestion. If you are in need of a solution to solve inadequate electrical or mechanical performance of the ... Mill-Max Mfg. Corp. is a manufacturer of electrical connector products and is located in the USA, outside the EU. Companies established outside the EU are not bound by the obligations of REACH, even if they export products into the customs territory of the European U nion. The responsibility for fulfilling the

Overview. Description: Nail Head Pin Mounting Feature: Through-Hole Solder Mount Mounting Hole: .044" (1,118mm) Tail Type: Soldertail Tail Diameter: .040" (1,016mm)

Engineering Notebooks. Welcome to the Mill-Max Engineering Notebook. Here you will find ways to learn more about our company, the technologies we use, our product offerings and how to use them. Choose a topic below or contact us with your specific questions anytime. Read on to learn more about our different product lines.

The crashes of the 737 Max could create a branding problem for Boeing that outlasts the technical issues. One of the greatest achievements of modern aviation is the relative ignora...Mill-Max Mfg. Corp. is the leading U.S. manufacturer of machined connector pins and receptacles. Our highly automated facility houses hundreds of production machines and a state-of-the-art plating department allowing us to ship in …MILL-MAX Mfg. Corp, is committed to supplying products that meet environmental control requirements for our Customers.MILL-MAX MFG. CORP. 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, New York 11771. Phone 516-922-6000 | Fax 516-922-9253 Mill-Max printed circuit board (PCB) pins are machined individual pins used for various plug-in applications and are functionally the dynamic building blocks within an interconnect system. Precision high-speed turning of pins to tolerances of +/-.0005" for critical to function features. Multi-Facet geometries for press-fit and surface mount ... About us. Mill-Max Mfg. Corp. is a vertically integrated engineering and manufacturing company capable of producing over 100 million interconnect components …Mill-Max Mfg. Corp., Oyster Bay, New York. 551 likes · 2 talking about this. Mill-Max Mfg. Corp. is a vertically integrated engineering and manufacturing...

To achieve an ultra-low profile mated pair using these target connectors, the Mill-Max series 815 and 817 (single and double row respectively) are the ideal choice. The 815/817 connectors, compressed to ½ stroke and used in combination with these new low profile target connectors, provide a board to board spacing of just .175” (4,45mm).Catalog | Mill-Max Mfg. Corp. Order a Catalog. Please select the format for your catalog. Book. Download. Order Imperial Order Metric. Download Imperial Download Metric. View …Overview. Description: Receptacle With No Tail Accepts .045"-.065" (1,143-1,651mm) diameter leads. Mounting Feature: Solder Mount Mounting Hole: .102" (2,591mm) Tail ...The 858-22-00X-80-XX1101 and 858-22-00X-80-XX2101 connectors are new additions to our 4 mm pitch rugged spring-loaded series, they are the first Mill-Max connectors to incorporate spring pins with active plungers at each end. This unique feature makes these connectors ideal for situations in which a soldered connection is not desirable or may not …Mill-Max Mfg. Corp. MAXIMUM connections, reliability and service. History. Established in 1971 by Roger Bahnik, Chairman and CEO, Mill-Max has a tradition of exercising total …Mill-Max Mfg. Corp. is the leading U.S. manufacturer of machined pin IC Sockets. Our highly automated facility houses hundreds of production machines and a state-of-the-art plating department allowing us to ship in …

Brass Alloy. 19: Packaged in Bulk. Active. Order Sample. PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 0326-. 1.Mill-Max connectors are available in the following configurations: Pluggable using a mating socket and header. Permanent by soldering a through-hole header to both boards. Fine pitch from 2mm down to 1mm pin-to-pin spacing. Surface mount headers and sockets. Right angle. Multiple board stacking using Organic Fiber Plug® pass-through sockets.

Mill Creek Park in Youngstown, Ohio is one of the largest and most beautiful urban parks in the U.S covering over 2,600 acres. Last Updated on April 28, 2023 My heart skipped sever...These products combine high quality Mill-Max pins with the convenience of an 8” pig-tail to suit a wide variety of applications. The new double row connectors, 889-22-0XX-70-501010 (spring-loaded) and 889-10-0XX-70-502010 (target), complement our existing single row pre-wired products, offering a greater number of wiring options in a ...With this development, all SMT spring-loaded connectors are now offered on tape and reel for automated pick & place assembly. The 855-22-XXX-30-002191, from 4-40 positions, are double row and on a space saving .050" (1.27 mm) grid. Each spring pin features a base geometry of .029" (0,74 mm) round by .010" (0,25 mm) … The spring-loaded connector has an above- board height of .378” (9.6 mm) and contains spring-loaded pins featuring .090” (2.3 mm) maximum stroke, a cycle life of up to 1,000,000 cycles, 20 milliohms contact resistance, *7.2 amp per pin current rating, and gold plating on all components. The target connector is shrouded to ensure alignment ... Mill-Max Mfg. Corp. has continuously grown and developed for over 50 years. Due to the diversified industries our products are used in, our customers subscribe to various Quality Operating Systems. The policies and operating procedures developed by Mill-Max have been established to be compliant with , MIL-I-45208, QS9000, ISO-9001, and AS9000. Mill-Max Mfg. Corp. is the leading U.S. manufacturer of machined pin IC Sockets. Our highly automated facility houses hundreds of production machines and a state-of-the-art plating department allowing us to ship in …Mill-Max manufactures a wide variety of interconnect components. Our product line includes precision-machined spring-loaded connectors, SIP, DIP, PGA, BGA, and PLCC sockets, board-to-board interconnects and pin headers, PCB pins, receptacles and solder terminals, all available in SMT and through-hole. We also are the source for wrapost ...PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 1460-. 8.For board-to-board or device-to-board connections, these 2mm spring-loaded connectors are a practical solution. The connectors feature spring pins with a rated travel of .0275” (0,7mm) and a maximum travel of .055” (1,4mm). With a base diameter on the pins of .056” (1,42mm) and a plunger diameter of .032” (,81mm) there is adequate space ...

Datasheet PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 878-. 22. -. 005. -00-011101.

MILL-MAX MFG. CORP. 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, New York 11771. Phone 516-922-6000 | Fax 516-922-9253. Inquiry Type. Email Address. Contact Name. Company Name. Phone Number.

Download Catalog Page. Ultra Low Profile Carrier SIP Sockets, .100 inch Grid, Single & Double - Page 77.TechCrunch's weekly newsletter dedicated to all things space, including launch, satellites, space stations and more. Hello and welcome back to Max Q! In this issue: Relativity Spac...Mill-Max Manufacturing Corp., Inc. expands its family of spring-loaded pin mating products, with four new series offering additional diameter and height options. These low profile SMT disc shaped terminals are perfect for applications where vertical space is at a premium. The expanded series include the 1593-X, 1618-X, 1625-X, 1656-X SMT discs ...MILL-MAX Mfg. Corp, is committed to supplying products that meet environmental control requirements for our Customers.MILL-MAX Mfg. Corp, is committed to supplying products that meet environmental control requirements for our Customers.Mill-Max Vertical Display Sockets. Series 296, 299 and 594 vertical display sockets are used to mount dot matrix and 7 segment LED displays at the edge of and perpendicular to a printed circuit board. This positions the display directly behind the translucent front panel of the equipment. Series 299 and 594 are through-hole …MILL-MAX Mfg. Corp, is committed to supplying products that meet environmental control requirements for our Customers.MILL-MAX MFG. CORP. 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, New York 11771. Phone 516-922-6000 | Fax 516-922-9253Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 9050-.

Products. Maximum Current = 9A @ 30˚ C Temp. Rise Max. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). Maximum Current = 9A @ 30˚ C Temp. Mill-Max connectors are available in the following configurations: Pluggable using a mating socket and header. Permanent by soldering a through-hole header to both boards. Fine pitch from 2mm down to 1mm pin-to-pin spacing. Surface mount headers and sockets. Right angle. Multiple board stacking using Organic Fiber Plug® pass-through sockets. Datasheet PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 878-. 22. -. 005. -00-011101.01: Packaged in Bulk. Active. Order Sample. PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 3920-.Instagram:https://instagram. molina doctors near mehot dish holder crossword puzzle cluedayz gunnearby lowes stores The Mill-Max engineering team specializes in custom parts and offers a vast catalog of off-the-shelf pogo pin solutions. Contact Mill-Max for expert advice and to establish a great connection with a global connectivity leader. Dive deep into the world of pogo pins — from design to manufacturing. Mill-Max's expertise can find the perfect ... 15: Packaged in Bulk. Active. Order Sample. PDF. Mill-Max products labeled with the RoHS symbol are compliant with all three ROHS Directives. All of our products previously described as RoHS (2002/95/EC) and RoHS-2 (2011/65/EC) are also compliant with RoHS-3 (2015/863/EU). 0345-. hydro gear 52114 cross reference autozoneplague doctor walk rs3 The spring-loaded connector has an above- board height of .378” (9.6 mm) and contains spring-loaded pins featuring .090” (2.3 mm) maximum stroke, a cycle life of up to 1,000,000 cycles, 20 milliohms contact resistance, *7.2 amp per pin current rating, and gold plating on all components. The target connector is shrouded to ensure alignment ... : Get the latest ODAWARA AUTO-MACHINE MFG stock price and detailed information including news, historical charts and realtime prices. Indices Commodities Currencies Stocks cayla koshar age MILL-MAX Mfg. Corp, is committed to supplying products that meet environmental control requirements for our Customers. Mill-Max connectors are available in the following configurations: Pluggable using a mating socket and header. Permanent by soldering a through-hole header to both boards. Fine pitch from 2mm down to 1mm pin-to-pin spacing. Surface mount headers and sockets. Right angle. Multiple board stacking using Organic Fiber Plug® pass-through sockets.